Interstate 20 End to End ©2020,
Iron
Butt Association, Sheridan, Wyoming Guidance: To successfully complete this ride, you must traverse the entirety of this trip on I-20. For the purposes of E2E certification you must transit I-20 end points through the merge at I-10 near Kent TX (DBR available, I-10 Exit 181) and through Exit 141B merge with I-95, Florence NC. Use caution to remain on I-20 the entire route. Do not take peripheral highways or feeder routes off of I-20 to avoid traffic congestion. Exercise routing caution through these cities to remain on the primary interstate: --Columbia SC --Atlanta GA --Birmingham AL --Dallas-Ft Worth TX There may be other cities where google maps will try to direct you off of I-20 because of traffic. DO NOT TAKE THESE QUICKER ROUTES. STAY ON I-20. For your convenience, here is a map of the suggested route. If you take this route (or the reverse) and finish with the required documentation and and in the required time, your ride has a greater chance of being verified. You may rely on your sattelite trtacking device to PROVE that you took these in-city routes; however, if you have any doubts about the accuracy or functioning of these devices, you would be well advised to get a DBR along each of these in-city routes SpotWalla use is mandatory: You must
use
a tracking device to record your entire actual ride route, and you must
upload
the track points to SpotWalla (Trips).
You must provide the SpotWalla trip link for the ride’s track points
when
applying for your ride certification. It
is your responsibility to ensure your satellite tracking device
functions
correctly and the tracking data is uploaded to SpotWalla for the entire
trip. Check the device and SpotWalla
settings before,
during and after the ride. Be
sure you comply with the SpotWalla Protocols listed here. |